Model	TSF-120LH-2835	TSF-168LH-2835
Color Temperature	2700K, 3000K, 4000K, 6000K	2700K, 3000K, 4000K, 6000K
Color	Red, Green, Blue, Yellow, Pink, Orange, Amber, RGB
Material	Silicone / PVC
Lumen Output/meter	385lm for white LED	435lm for white LED
Voltage Input	12v/24v/110v/220v	12v/24v/110v/220v
Power/meter	8W	12W
Housing Size(mm)	14*26, 9*18, 11*19, 18*18, Φ17,Φ25	14*26, 9*18, 11*19, 18*18, Φ17,Φ25
LEDs/meter	120LEDs	120LEDs
Cutting unit	12V/50mm(3LED),24V/100mm(6LEDs) 110V/50cm(30LEDs), 240V/100cm(60LEDs)	12V/50mm(3LED),24V/100mm(6LEDs) 110V/50cm(30LEDs), 240V/100cm(60LEDs
Max Driver Length	12V/10m, 24V/20m, 110V/100m, 240V/100m	12V/10m, 24V/20m, 110V/100m, 240V/100m

IC RGB & RGBW LED Neon Flex:

Model No	TSF-120L-2835	TSF-168L-2835	TSF-192L-2835
LED Type	SMD 2835	SMD 2835	SMD 2835
Color Temperature	2700K, 3000K, 4000K, 6000K	2700K, 3000K, 4000K, 6000K	2700K, 3000K, 4000K, 6000K
Color	WW / CW	WW / CW	WW / CW
Color Rendering Index	80+(White)	80+(White)	80+(White)
Lumen Ouput/meter	385lm for white LED	435lm for white LED	455lm for white LED
Voltage Input	24VDC	24VDC	24VDC
Power/meter	8W	12W	12W
Housing Size	14*26mm & 11*19mm	14*26mm & 11*19mm	14*26mm & 11*19mm
LEDs/meter	120LEDs	168LEDs	192LEDs
Cutting Unit	24V 100mm(12LED)	24V 100mm(12LED)	24V 100mm(12LED)
Max Driver Length	24V / 20m	24V / 20m	24V / 20m

Packaging Details:

Installation:

The LED neon installation requires planning to ensure timely, successful installation with minimal complications and down time.




Suggestion:
  

              . Consult an Electrical Inspector to review all wiring plans.

                . Create a Layout Plan drawing, per a Lighting Designer's or Architect's recommendation.

                . Consult  TangSong Electric Application Engineering Services as needed.



Cutting your Neon flex:



                 . Cut your Neon light to your desired length for any application.

                 . Neon lights are able to cut in specific intervals only. These vary depending on  the number of wires your neon light

                  contains. For example, the red neon light is cut in 100cm intervals under 220VAC. A careful examination of the exterior

                  of the neon light casing will reveal tiny scissor icons. These icons mark the increment where it is safe to cut your neon

                  light. First, calculate the interval that will work for your application. For our Neon light example with a cutting interval of 

                  100cm under 220VAC, this can be done by taking the number of meter you need.  If you have an even number you have

                  a even interval of 100cm and you can simply count the intervals or measure the desired number of meter and cut at the 

                  scissor icon. If you do not have an even number you will need to choose the next closest interval and cut appropriately. 

                  To cut, use our neon light cutter tool or a pair of scissors to snip the Neon lighting at the You are now ready to attach a 

                   power cord, End cap, specified mark.

           
                 . Be sure to make a clean vertical cut to avoid a short. Now bend the Neon light to the left and to the right and trim

                   off any excess wire that might protrude.

              Important: Failure to cut at  the marked interval will result in damage to your neon lights.





Application:



Neon Flex as its easy to bend and flexible cut, are widely used in Ambient lighting, Wedding lighting, Decoration lighting, Cover 

Lighting, Concealed accent lighting, Edge lighting, Closet illumination, Cubicle, workbench lighting, and other places where 

Convenient install and easy maintain lighting needs.

'